Trilux Prop-O-Drev .
	Antifouling
	For Propellers, Outboards and Sterngear

PRODUCT DESCRIPTION Trilux Prop-O-Drev is a hard antifouling that is specially formulated for use on outdrives, outboard legs, propellers and sterngear. * Aerosol spray is ideal for painting awkward shapes and difficult to reach areas. * Quick and easy application saves you time and effort. * Suitable for use on aluminium and stainless steel. PRODUCT INFORMATION Colour YBA768-Grey, YBA798-Black Finish Matt Specific Gravity 0.8 Volume Solids 9% average Typical Shelf Life 2 yrs VOC (As Supplied) 691 g/lt Unit Size 500 ml DRYING/OVERCOATING INFORMATION Drying 0°C 15°C 23°C 35°C Immersion 3hrs 3hrs 3hrs 3hrs Overcoating Substrate Temperature 0°C 15°C 23°C 35°C Overcoated By Min Max Min Max Min Max Min Max Trilux Prop-O-Drev  30mins  ext  30mins  ext  30mins  ext  30mins  ext APPLICATION AND USE Preparation Prime bare metal and factory enamelled surfaces with 2 coats of VC Prop-O-Drev Primer. This is essential on aluminium and alloy as Trilux Prop-O-Drev is NOT suitable for direct application. For best results on previously antifouled surfaces, remove existing paintwork. Alternatively, abrade with wet 240 grade paper. Method Spray sparingly 10-15 cm (4-10") from the surface. Apply a minimum of 3 coats, allowing 30 mins between coats. Hints Mixing Shake can vigorously. Once mixing ball is heard, shake for minimum 2 minutes prior to use. After spraying, invert can and spray for 2 seconds to clean the nozzle. Thinner VC General Thinner. Cleaner VC General Thinner. Other Take care to apply all the paint calculated even if it means applying an extra coat. It is important for performance to apply the correct thickness. Some Important Points To prevent premature failure, ensure the correct amount of paint is applied using the coverage as a guide. Product temperature should be minimum 0°C and maximum 35°C. Ambient temperature should be minimum 0°C/32°F and maximum 35°C/95°F. Substrate temperature should be minimum 1°C above dew point and maximum 35°C. Compatibility/Substrates Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc-sprayed metals. Also suitable for factory enamelled finishes. Number of Coats 3 minimum Coverage (Theoretical) - Approx. 1 can per medium-sized outdrive. Recommended DFT Application Methods Aerosol can TRANSPORTATION,STORAGE AND SAFETY INFORMATION Storage GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Trilux Prop-O-Drev to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight. TRANSPORTATION: Trilux Prop-O-Drev should be kept in securely closed containers during transport and storage. Safety GENERAL: Contains biocides. Antifoulings should only be wet sanded. Never dry sand or burn-off old antifoulings. Read the label safety section for Health and Safety Information, also available from our Technical Help Line. DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal. Remainders of Trilux Prop-O-Drev cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities. IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at their own risk and we can accept no responsibility for the performance of the product or for any loss or damage (other than death or personal or injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development. , International, the Akzo Nobel logo and other products mentioned in this publication are trademarks of, or licensed to Akzo Nobel. Regional Addresses Head Office International Paint Ltd 26th Floor, Portland House Bressenden Place London SW1E 5BG United Kingdom tel: +44 (0) 20 7932 9900 fax: +44 (0) 20 7932 9932 European Region International Paint Ltd 1 Wellington Park Hedge End, Southampton Hampshire SO30 2QU United Kingdom tel: +44 (0) 1489 775050 fax: +44 (0) 1489 785867 Asia Region International Paint Singapore (Pte) Ltd 449 Tagore Industrial Avenue 01-03 Greatland Industrial Building Singapore 787820 tel: +65 6453 1981 fax: +65 6453 1778 Australasia Region International Paint Unit E54, 76 Waterway Drive Coomera Qld 4209 Australia tel: +61 (0) 7 5573 9600 fax: +61 (0) 7 5573 9677 North America Region International Paint LLC 2270 Morris Avenue Union New Jersey 07083 USA tel: +1 (0) 908 686 1300 fax: +1 (0) 908 686 8545 South America Region International Paint Rod Rap tavares, KM 18.5 Predio Administrativo 11 Butanta CEP 05577-300 Sao Paulo, Brazil tel: +55 (0) 11 3789 2000 fax: +55 (0) 11 3789 2200

			Ref: Issue Date: Supersedes:	05000273 26-Sep-2008 16-Jan-2008