| Thinner
No.3 is suitable for thinning Antifoulings, Bottom Coatings and other
Special Paints such as MicronŽ Extra, Micron CSC, Micron WQ, CruiserŽ
Premium, Cruiser Superior, Cruiser, Cruiser Future/Eco, Interspeed
Extra Strong, Interspeed Ultra, Prima, Trilux, Soft Antifouling,
Boatgard, Waterways, FabiŽ, CT Kobberstoff, Waterways Future/Fabi Eco,
Veridian Tiecoat, Veridian Topcoat, PrimoconŽ, Motorfarg and Interstrip
AF. Suitable for equipment cleaning in association with all of the
above products and also for Micron Optima, Micron Future/Eco and Lago
Racing II. |
|
| Colour |
YTA085 |
| Specific Gravity |
0.875 |
| Volume Solids |
0.00% |
| Typical Shelf Life |
2 yrs |
| VOC (As Supplied) |
875 g/lt |
| Unit Size |
500 ml 1 Lt |
|
|
Overcoating |
|
Substrate Temperature |
| |
|
|
|
|
| Overcoated By |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
|
|
| Method |
When using for surface wipe down, turn the cloth frequently to avoid re-applying residues. |
|
|
| Hints |
Ventilation and Humidity Control Ensure adequate ventilation during use. |
|
|
| Some Important Points |
No special restrictions. |
|
|
| Compatibility/Substrates |
Compatible
with all International Antifoulings and Bottom Coatings as well as some
other specialist products. Thinner No.3 can be used for spraying single
pack varnishes and finishes. |
|
|
|
|
| Recommended DFT |
|
|
| Storage |
GENERAL INFORMATION:
Exposure
to air and extremes of temperature should be avoided. For the full
shelf life of this product to be realised ensure that between use the
container is firmly closed and the temperature is between 5°C/40°F and
35°C/95°F. Keep out of direct sunlight.
TRANSPORTATION:
The product should be kept in securely closed containers during transport and storage.
|
|
|
| Safety |
GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line.
DISPOSAL:
Do not discard tins or pour paint into water courses, use the
facilities provided. It is best to allow paints to harden before
disposal.
Remainders of Thinner No.3 cannot be disposed of through
the municipal waste route or dumped without permit. Disposal of
remainders must be arranged for in consultation with the authorities.
|
|
| IMPORTANT NOTES |
The
information given in this sheet is not intended to be exhaustive. Any
person using the product without first making further written enquiries
as to the suitability of the product for the intended purpose does so
at their own risk and we can accept no responsibility for the
performance of the product or for any loss or damage (other than death
or personal or injury resulting from negligence) arising out of such
use. The information contained in this sheet is liable to modification
from time to time in the light of experience and our policy of
continuous product development. |
|
  , International,
the Akzo Nobel logo and other products mentioned in this publication
are trademarks of, or licensed to Akzo Nobel. ŠAkzo Nobel 2008. |
|
Head Office
International Paint Ltd
26th Floor, Portland House
Bressenden Place
London SW1E 5BG
United Kingdom
tel: +44 (0) 20 7932 9900
fax: +44 (0) 20 7932 9932 |
European Region
International Paint Ltd
1 Wellington Park
Hedge End, Southampton
Hampshire SO30 2QU
United Kingdom
tel: +44 (0) 1489 775050
fax: +44 (0) 1489 785867 |
Asia Region
International Paint Singapore (Pte) Ltd
449 Tagore Industrial Avenue
01-03 Greatland Industrial Building
Singapore 787820
tel: +65 6453 1981
fax: +65 6453 1778 |
Australasia Region
International Paint
Unit E54, 76 Waterway Drive
Coomera Qld 4209
Australia
tel: +61 (0) 7 5573 9600
fax: +61 (0) 7 5573 9677 |
North America Region
International Paint LLC
2270 Morris Avenue
Union
New Jersey 07083
USA
tel: +1 (0) 908 686 1300
fax: +1 (0) 908 686 8545 |
South America Region
International Paint
Rod Rap tavares, KM 18.5
Predio Administrativo 11
Butanta CEP 05577-300
Sao Paulo, Brazil
tel: +55 (0) 11 3789 2000
fax: +55 (0) 11 3789 2200 |
|
