Thinner No.7
	Thinners & Solvents
	Epoxy Thinner

PRODUCT DESCRIPTION Thinner No.7 is suitable for thinning and/or equipment cleaning in association with: Interprotect®, Gelshield® 200, Gelshield, Etch Primer and for equipment cleaning only in association with Interfill® 400, Interfill 830, Interfill 833, Interfill 835. PRODUCT INFORMATION Colour YTA061 Specific Gravity 0.857 Volume Solids 0.00%  Typical Shelf Life 2 yrs VOC (As Supplied) 857 g/lt Unit Size 1 Lt DRYING/OVERCOATING INFORMATION Drying Overcoating Substrate Temperature Overcoated By Min Max Min Max Min Max Min Max APPLICATION AND USE Method When using for surface wipe down, turn the cloth frequently to avoid re-applying residues. Hints Ventilation and Humidity Control Ensure adequate ventilation during use. Some Important Points No special restrictions. Compatibility/Substrates Compatible with all epoxy based primers and fillers. Read the datasheet for each individual product for specific thinning recommendations, which will depend upon how the product is to be used. Recommended DFT TRANSPORTATION,STORAGE AND SAFETY INFORMATION Storage GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight. TRANSPORTATION: The product should be kept in securely closed containers during transport and storage. Safety GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line. DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal. Remainders of Thinner No.7 cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities. IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at their own risk and we can accept no responsibility for the performance of the product or for any loss or damage (other than death or personal or injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development. , International, the Akzo Nobel logo and other products mentioned in this publication are trademarks of, or licensed to Akzo Nobel. ©Akzo Nobel 2008. Regional Addresses Head Office International Paint Ltd 26th Floor, Portland House Bressenden Place London SW1E 5BG United Kingdom tel: +44 (0) 20 7932 9900 fax: +44 (0) 20 7932 9932 European Region International Paint Ltd 1 Wellington Park Hedge End, Southampton Hampshire SO30 2QU United Kingdom tel: +44 (0) 1489 775050 fax: +44 (0) 1489 785867 Asia Region International Paint Singapore (Pte) Ltd 449 Tagore Industrial Avenue 01-03 Greatland Industrial Building Singapore 787820 tel: +65 6453 1981 fax: +65 6453 1778 Australasia Region International Paint Unit E54, 76 Waterway Drive Coomera Qld 4209 Australia tel: +61 (0) 7 5573 9600 fax: +61 (0) 7 5573 9677 North America Region International Paint LLC 2270 Morris Avenue Union New Jersey 07083 USA tel: +1 (0) 908 686 1300 fax: +1 (0) 908 686 8545 South America Region International Paint Rod Rap tavares, KM 18.5 Predio Administrativo 11 Butanta CEP 05577-300 Sao Paulo, Brazil tel: +55 (0) 11 3789 2000 fax: +55 (0) 11 3789 2200

			Ref: Issue Date: Supersedes:	05000118 4-Sep-2008 31-Jan-2008